Fw-1047; Fw-1048; Fw-1049 - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Reference
Brocade fabric os message reference - supporting fabric os v5.3.0 (53-1000437-01, june 2007)
Hide thumbs
Also See for A7533A - Brocade 4Gb SAN Switch Base:
- Reference manual (1240 pages) ,
- Command reference manual (894 pages) ,
- Administrator's manual (452 pages)
Table of Contents
Advertisement
27
FW-1047
FW-1047
Message
<timestamp>, [FW-1047], <sequence-number>,, WARNING, <system-name>, <Label>, is
above high boundary(High=<High value>, Low=<Low value>). Current value is <Value>
<Unit>.
Probable Cause
Indicates that the value of the small form-factor pluggable (SFP) voltage has risen above the high
boundary. The supplied current of the SFP transceiver is outside of the normal range, indicating
possible hardware failure.
Recommended
If the current rises above the high boundary, you must replace the SFP.
Action
Severity
WARNING
FW-1048
Message
<timestamp>, [FW-1048], <sequence-number>,, INFO, <system-name>, <Label>, is
between high and low boundaries(High=<High value>, Low=<Low value>). Current value
is <Value> <Unit>.
Probable Cause
Indicates that the value of the small form-factor pluggable (SFP) voltage has changed from a value
outside of the acceptable range to a value within the acceptable range.
Recommended
No action is required. Respond to this message as is appropriate to the particular policy of the
Action
end-user installation.
Severity
INFO
FW-1049
Message
<timestamp>, [FW-1049], <sequence-number>,, INFO, <system-name>, <Label>, value
has changed(High=<High value>, Low=<Low value>). Current value is <Value> <Unit>.
Probable Cause
Indicates that the value of the small form-factor pluggable (SFP) voltage has changed. Frequent
voltage fluctuations are an indication that the SFP is deteriorating.
Recommended
Replace the SFP if you see frequent voltage fluctuations.
Action
Severity
INFO
164
Fabric OS Message Reference
53-1000437-01
Advertisement
Table of Contents
