Sulb-1005; Sulb-1006; Sulb-1007; Sulb-1008 - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Reference

66

SULB-1005

SULB-1005
Message
<timestamp>, [SULB-1005], <sequence-number>,, INFO, <system-name>, Current Active
CP is preparing to failover.
Probable Cause Indicates that the active CP is about to reboot. The standby CP is taking over as the active CP.
Recommended No action is required. The firmwareDownload command is progressing as expected.
Action
Run the firmwareDownloadStatus command for more information.
Severity INFO

SULB-1006

Message
<timestamp>, [SULB-1006], <sequence-number>,, INFO, <system-name>, Forced
failover succeeded. New Active CP is running new firmware.
Probable Cause Indicates that the previous standby has now become the active CP and is running the new firmware
version.
Recommended No action is required. The firmwareDownload command is progressing as expected.
Action
Run the firmwareDownloadStatus command for more information.
Severity INFO

SULB-1007

Message
<timestamp>, [SULB-1007], <sequence-number>,, INFO, <system-name>, Standby CP
reboots.
Probable Cause Indicates that the standby CP is rebooting with new firmware.
Recommended No action is required. The firmwareDownload command is progressing as expected.
Action
Run the firmwareDownloadStatus command for more information.
Severity INFO

SULB-1008

Message
<timestamp>, [SULB-1008], <sequence-number>,, INFO, <system-name>, Standby CP
booted successfully with new firmware.
Probable Cause Indicates that the standby CP has rebooted successfully.
Recommended No action is required. The firmwareDownload command is progressing as expected.
Action
Run the firmwareDownloadStatus command for more information.
Severity INFO
400 Fabric OS Message Reference
53-1000437-01