25
FSS-1003
FSS-1003
Message
<timestamp>, [FSS-1003], <sequence-number>,, WARNING, <system-name>, Component
(<component name>) misused the update transaction (<transaction ID>) without
marking the transaction beginning.
Probable Cause
Indicates that the Fabric OS state synchronization (FSS) service has dropped the update because
an application has not set the transaction flag correctly.
Recommended
Run the haSyncStart command if this is a dual-CP system, or reboot the switch if it is a nonbladed
Action
system.
If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the
supportSave command and contact your switch service provider.
Severity
WARNING
FSS-1004
Message
<timestamp>, [FSS-1004], <sequence-number>,, ERROR, <system-name>, Memory
shortage
Probable Cause
Indicates that the system ran out of memory.
Recommended
Run the memShow command to view memory usage.
Action
Run the haSyncStart command if this is a dual-CP system, or reboot the switch if it is a nonbladed
system.
If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the
supportSave command and contact your switch service provider.
Severity
ERROR
FSS-1005
Message
<timestamp>, [FSS-1005], <sequence-number>,, WARNING, <system-name>, FSS read
failure
Probable Cause
Indicates that the read system call to the Fabric OS state synchronization (FSS) device failed.
Recommended
If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the
Action
supportSave command and contact your switch service provider.
Severity
WARNING
150
Fabric OS Message Reference
53-1000437-01