Fw-1402; Fw-1403; Fw-1424 - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Reference
Brocade fabric os message reference - supporting fabric os v5.3.0 (53-1000437-01, june 2007)
Hide thumbs
Also See for A7533A - Brocade 4Gb SAN Switch Base:
- Reference manual (1240 pages) ,
- Command reference manual (894 pages) ,
- Administrator's manual (452 pages)
Table of Contents
Advertisement
27
FW-1402
Probable Cause
Indicates that the flash usage percentage has fallen below the low boundary. Flash increases and
decreases slightly with normal operation of the switch. Excessive permanent increases can lead to
future problems.
Recommended
No action is required. Respond to this message as is appropriate to the particular policy of the
Action
end-user installation.
Severity
INFO
FW-1402
Message
<timestamp>, [FW-1402], <sequence-number>,, WARNING, <system-name>, <Label>, is
above high boundary(High=<High value>, Low=<Low value>). Current value is <Value>
<Unit>.
Probable Cause
Indicates that the flash usage percentage has risen above the high boundary. Flash increases and
decreases slightly with normal operation of the switch. Excessive permanent increases can lead to
future problems.
Recommended
You might have to remove some unwanted files to create some flash space. Run the supportSave
Action
command to remove files from the kernel space.
Severity
WARNING
FW-1403
Message
<timestamp>, [FW-1403], <sequence-number>,, INFO, <system-name>, <Label>, is
between high and low boundaries(High=<High value>, Low=<Low value>). Current value
is <Value> <Unit>.
Probable Cause
Indicates that the flash usage percentage has changed from a value outside of the acceptable
range to a value within the acceptable range. Flash increases and decreases slightly with normal
operation of the switch. Excessive permanent increases can lead to future problems.
Recommended
No action is required. Respond to this message as is appropriate to the particular policy of the
Action
end-user installation.
Severity
INFO
FW-1424
Message
<timestamp>, [FW-1424], <sequence-number>,, WARNING, <system-name>, Switch status
changed from <Previous state> to <Current state>.
Probable Cause
Indicates that the switch status is not in a healthy state. This occurred because of a policy violation.
Recommended
Run the switchStatusShow command to determine the policy violation.
Action
Severity
WARNING
226
Fabric OS Message Reference
53-1000437-01
Advertisement
Table of Contents
