Sec-1173; Sec-1174; Sec-1175; Sec-1176 - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Reference

SEC-1173

Message
<timestamp>, [SEC-1173], <sequence-number>,, ERROR, <system-name>, Lost contact
with Primary FCS switch.
Probable Cause Indicates that the switch has lost contact with the primary fabric configurations server (FCS) switch
in the secure fabric. This could be due to the primary FCS being disabled.
Recommended If the primary FCS was disabled intentionally, no action is required; if not, check the primary FCS.
Action
Severity ERROR

SEC-1174

Message
<timestamp>, [SEC-1174], <sequence-number>,, ERROR, <system-name>, Failed to set
<FCS or non-FCS>
Probable Cause Indicates that the FCS or non-FCS password could not be set.
Recommended Verify that all switches in the fabric are in time synchronization with the primary and that no
Action external entity is trying to access the fabric. When verification is complete, retry the operation.
Severity ERROR

SEC-1175

Message
<timestamp>, [SEC-1175], <sequence-number>,, ERROR, <system-name>, Failed to
install zone data.
Probable Cause Indicates that the zone database could not be installed on the switch.
Recommended Verify that all switches in the fabric are in time synchronization with the primary and that no
Action external entity is trying to access the fabric. When verification is complete, retry the operation.
Severity ERROR

SEC-1176

Message
<timestamp>, [SEC-1176], <sequence-number>,, ERROR, <system-name>, Failed to
generate new version stamp.
Probable Cause Indicates that the primary fabric configurations server (FCS) failed to generate a new version stamp
due to the fabric not being stable.
Recommended Verify that all switches in the fabric are in time synchronization with the primary and that no
Action external entity is trying to access the fabric. When verification is complete, retry the operation.
Severity ERROR
Fabric OS Message Reference
53-1000437-01
password.
63
SEC-1173
375