Sec-1324; Sec-1325; Sec-1326 - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Reference

63

SEC-1324

SEC-1324
Message
<timestamp>, [SEC-1324], <sequence-number>,, INFO, <system-name>, Fabric
transaction failure. RCS error:
Probable Cause Indicates that the reliable commit service (RCS) transaction failed with specified reason code.
Recommended Verify that the event was planned. If the event was planned, no action is required. If the event was
Action not planned, take appropriate action as defined by your enterprise security policy.
Severity INFO

SEC-1325

Message
<timestamp>, [SEC-1325], <sequence-number>,, ERROR, <system-name>, Security
enforcement: Switch <switch WWN> connecting to port <Port number> is not
authorized to stay in fabric.
Probable Cause Indicates that due to a switch connection control (SCC) policy violation, the switch is being disabled
on the specified port.
Recommended No action is required unless the switch must remain in the fabric. If the switch must remain in the
Action fabric, add the switch world-wide name (WWN) to the SCC policy, then attempt to join the switch
with the fabric.
Severity ERROR

SEC-1326

Message
<timestamp>, [SEC-1326], <sequence-number>,, INFO, <system-name>, Event: fddcfg
--fabwideset, Status: success, Info: Fabric wide configuration set to
<Fabric-wide configuration set by user>
Probable Cause Indicates that the specified event has occurred.
Recommended Verify that the event was planned. If the event was planned, no action is required. If the event was
Action not planned, take appropriate action as defined by your enterprise security policy.
Severity INFO
392
<Error code>
.
Fabric OS Message Reference
53-1000437-01