Sec-1117; Sec-1118; Sec-1119 - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Reference

63

SEC-1117

SEC-1117
Message
<timestamp>, [SEC-1117], <sequence-number>,, INFO, <system-name>, Fail to set
<data>
Probable Cause Indicates that the switch failed to save the data received by the primary fabric configurations
server (FCS) switch. This data can be an FCS password, a non-FCS password, SNMP data, or
multiple user authentication data.
Recommended Run the secFabricShow command to verify that all switches in fabric are in the ready state. When
Action all switches are in the ready state, retry the operation.
Severity INFO

SEC-1118

Message
<timestamp>, [SEC-1118], <sequence-number>,, INFO, <system-name>, Fail to set
SNMP string.
Probable Cause Indicates that the SNMP string could not be set.
Recommended Usually this problem is transient. Retry the command.
Action
Severity INFO

SEC-1119

Message
<timestamp>, [SEC-1119], <sequence-number>,, INFO, <system-name>, Secure mode has
been enabled.
Probable Cause Indicates that the secure Fabric OS was enabled by the secModeEnable command.
Recommended Verify that the security event was planned. If the security event was planned, there is no action
Action required. If the security event was not planned, take appropriate action as defined by your
enterprise security policy.
Severity INFO
364
.
Fabric OS Message Reference
53-1000437-01