Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Reference page 53

TABLE 2
Command
agtCfgDefault
agtCfgSet
agtCfgShow
auditCfg
auditShow
diagPost
errClear
errDelimterSet
errDump
errFilterSet
errShow
pdShow
portErrShow
portLogClear
portLogDisable
portLogDump
portLogDumpPort
portLogEventShow
portLoginShow
portLogPdisc
portLogReset
portLogResize
portLogShow
portLogShowPort
portLogTypeDisable
portLogTypeEnable
setVerbose
supportFtp
Fabric OS Message Reference
53-1000437-01
Commands for Viewing or Configuring the System Parameters and Logs
Description
Resets the SNMP recipients to default values.
Modifies the SNMP agent configuration.
Displays the current SNMP agent configuration.
Configures the audit message log.
Modifies and displays audit log filter configuration.
Set or display diagnostic POST (Power-On Self-Test) configuration.
Clears all error log messages for all switch instances on this control
processor (CP).
Sets the error log start and end delimiter for messages pushed to the
console.
Displays the entire error log, without page breaks. Use the -r option to show
the messages in reverse order, from newest to oldest.
Sets an error severity filter for the system console.
Displays the entire error log, with page breaks. Use the -r option to show the
messages in reverse order, from newest to oldest.
Displays the contents of the panic dump and core dump files.
Displays the port error summary.
Clears the port log. If the port log is disabled, this commands enables it.
Disables the port log facility.
Displays the port log, without page breaks.
Displays the port log of the specified port, without page breaks.
Displays which port log events are currently being reported.
Displays port logins.
Sets or clear the debug pdisc_flag.
Enables the port log facility.
Resizes the port log to the specified number of entries.
Displays the port log, with page breaks.
Displays the port log of specified port, with page breaks.
Disables an event from reporting to the port log. Port log events are
described by the portLogEventShow command.
Enables an event to report to the port log. Port log events are described by
the portLogEventShow command.
Sets the verbose level of a particular module within the Fabric OS.
Sets, clears, or displays support FTP parameters or a time interval to check
the FTP server.
Viewing and Configuring System Message Logs
1
5