Ms-1003; Ms-1004 - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Reference

48

MS-1003

•
•
Severity INFO
MS-1003
Message
<timestamp>, [MS-1003], <sequence-number>,, INFO, <system-name>, MS detected
Unstable Fabric(
Probable Cause Indicates that the management server (MS) detected an unstable fabric; the command or
operation might not be successfully completed. This message is often transitory.
The message string can be one of the following:
•
•
The domain number is the target domain that caused error.
Recommended The fabric might be reconfiguring, forming, or merging. Wait a few minutes and try the operation
Action again.
Run the fabricShow command or the secFabricShow command to verify that the number of
domains matches the Management Server known domains.
If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the
supportSave command and contact your switch service provider.
Severity INFO

MS-1004

Message
<timestamp>, [MS-1004], <sequence-number>,, INFO, <system-name>, MS detected ONLY
1 Domain(d=
Probable Cause Indicates that the management server (MS) detected an unstable count of domains in its own local
resource.
Recommended This message is often transitory.
Action
The fabric might be reconfiguring, forming, or merging. Wait a few minutes and try the operation
again.
Run the fabricShow command or the secFabricShow command to verify that the number of
domains matches the Management Server known domains.
If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the
supportSave command and contact your switch service provider.
294
<GCAP Rejected (reason =BUSY) by>
Run the firmwareDownload command to upgrade the firmware level on the switch to a level
that supports RCS. RCS is supported in Fabric OS v2.6, v3.1 and greater, and v4.1 and greater.
<Reject EXGPLDB from>
Wait a few minutes and try the command again.
<message string><domain number>
<DOMAIN_INVALID for a req from>
The domain is invalid for a request.
<No WWN for>
Unable to acquire the World Wide Name (WWN) for the corresponding domain.
<domain in local resource>
).
).
Fabric OS Message Reference
53-1000437-01