Fw-1379; Fw-1400; Fw-1401 - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Reference
Brocade fabric os message reference - supporting fabric os v5.3.0 (53-1000437-01, june 2007)
Hide thumbs
Also See for A7533A - Brocade 4Gb SAN Switch Base:
- Reference manual (1240 pages) ,
- Command reference manual (894 pages) ,
- Administrator's manual (452 pages)
Table of Contents
Advertisement
Probable Cause
Indicates that the number of illegal commands has risen above the high boundary. This counter
tracks how many times commands allowed only on the primary fabric configuration server (FCS)
switch have been executed on a non-primary FCS switch. There are many commands that can be
executed only on the primary FCS switch as well as one security command that can be executed
only on a backup FCS switch. The counter increments every time someone issues one of these
commands on a switch where it is not allowed.
Recommended
Responses to security-class messages depend on user policies. Consult your security administrator
Action
for response strategies and policies.
Severity
WARNING
FW-1379
Message
<timestamp>, [FW-1379], <sequence-number>,, INFO, <system-name>, <Label>, is
between high and low boundaries(High=<High value>, Low=<Low value>). Current value
is <Value> <Unit>.
Probable Cause
Indicates that the number of illegal commands has changed from a value outside of the acceptable
range to a value within the acceptable range. This counter tracks how many times commands
allowed only on the primary fabric configuration server (FCS) switch have been executed on a
non-primary FCS switch. There are many commands that can be executed only on the primary FCS
switch as well as one security command that can be executed only on a backup FCS switch. The
counter increments every time someone issues one of these commands on a switch where it is not
allowed.
Recommended
No action is required.
Action
Severity
INFO
FW-1400
Message
<timestamp>, [FW-1400], <sequence-number>,, INFO, <system-name>, <Label>, value
has changed(High=<High value>, Low=<Low value>). Current value is <Value> <Unit>.
Probable Cause
Indicates that the flash usage percentage has changed. Flash increases and decreases slightly
with normal operation of the switch. Excessive permanent increases can lead to future problems.
Recommended
No action is required. Respond to this message as is appropriate to the particular policy of the
Action
end-user installation.
Severity
INFO
FW-1401
Message
<timestamp>, [FW-1401], <sequence-number>,, INFO, <system-name>, <Label>, is
below low boundary(High=<High value>, Low=<Low value>). Current value is <Value>
<Unit>.
Fabric OS Message Reference
53-1000437-01
27
FW-1379
225
Advertisement
Table of Contents
