RAS System Messages
RAS-1001
Message
<timestamp>, [RAS-1001], <sequence-number>,, INFO, <system-name>, First failure
data capture (FFDC) event occurred.
Probable Cause
Indicates that a failure happened and the failure data was captured.
Recommended
Run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave
Action
command and contact your switch service provider.
Severity
INFO
RAS-1002
Message
<timestamp>, [RAS-1002], <sequence-number>,, WARNING, <system-name>, First
failure data capture (FFDC) maximum storage size (
reached.
Probable Cause
Indicates that the maximum storage size for FFDC data capture is reached.
Recommended
Run the supportSave command and contact your switch service provider.
Action
Severity
WARNING
RAS-1003
Message
<timestamp>, [RAS-1003], <sequence-number>,, WARNING, <system-name>, Audit
message log is
Probable Cause
Indicates the current state of the audit message log.
Recommended
No action is required.
Action
Severity
WARNING
Fabric OS Message Reference
53-1000437-01
<____message____>
.
<log size limit>
MB) was
Chapter
57
321