Fw-1428; Fw-1429; Fw-1430 - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Reference

27

FW-1428

FW-1428
Message
<timestamp>, [FW-1428], <sequence-number>,, WARNING, <system-name>, Switch status
change contributing factor Power supply:
Probable Cause Indicates that the switch status is not in a healthy state. This occurred because the number of
missing power supplies is greater than or equal to the policy set by the switchStatusPolicySet
command.
Recommended Replace the missing power supply.
Action
Severity WARNING

FW-1429

Message
<timestamp>, [FW-1429], <sequence-number>,, WARNING, <system-name>, Switch status
change contributing factor: Power supplies are not redundant.
Probable Cause Indicates that the switch status is not in a healthy state. This occurred because the power supplies
are not in the correct slots for redundancy.
Recommended Rearrange the power supplies so that one is in an odd slot and other in an even slot to make them
Action redundant.
Severity WARNING

FW-1430

Message
<timestamp>, [FW-1430], <sequence-number>,, WARNING, <system-name>, Switch status
change contributing factor <string>.
Probable Cause Indicates that the switch status is not in a healthy state. This occurred because the number of
faulty temperature sensors is greater than or equal to the policy set by the switchStatusPolicySet
command. A temperature sensor is faulty when the sensor value is not in the acceptable range or
is faulty.
Recommended Replace the field-replaceable unit (FRU) with the faulty temperature sensor.
Action
Severity WARNING
228
<Number Missing>
absent.
Fabric OS Message Reference
53-1000437-01