Plat-1000; Plat-1001; Plat System Messages - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Reference

PLAT System Messages

PLAT-1000

Message
<timestamp>, [PLAT-1000], <sequence-number>, FFDC, CRITICAL, <system-name>,
<Function name> <Error string>
Probable Cause Indicates that nonrecoverable PCI errors have been detected.
Recommended The system will be faulted and might automatically reboot.
Action
If the system does not reboot, then try issuing the reboot command from a command-line prompt.
Run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave
command and contact your switch service provider.
Severity CRITICAL

PLAT-1001

Message
<timestamp>, [PLAT-1001], <sequence-number>,, INFO, <system-name>, Resetting
standby CP (double reset may occur)
Probable Cause Indicates that the standby CP is being reset. This message is typically generated by a CP that is in
the process of becoming the active CP. Note that in certain circumstances a CP may experience a
double reset and reboot twice in a row. A CP can recover automatically even if it has rebooted
twice.
Recommended No action is required.
Action
Severity INFO
Fabric OS Message Reference
53-1000437-01
Chapter
53
313