Fw-1313; Fw-1314; Fw-1315 - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Reference

FW-1313

Message
<timestamp>, [FW-1313], <sequence-number>,, INFO, <system-name>, <Label>, is
below low boundary(High=<High value>, Low=<Low value>). Current value is <Value>
<Unit>.
Probable Cause Indicates that the number of simple network management protocol write (WSNMP) violations has
fallen below the low boundary. WSNMP violations indicate that an SNMP "get/set" operation
request has been received from an unauthorized IP address.
Recommended No action is required.
Action
Severity INFO

FW-1314

Message
<timestamp>, [FW-1314], <sequence-number>,, WARNING, <system-name>, <Label>, is
above high boundary(High=<High value>, Low=<Low value>). Current value is <Value>
<Unit>.
Probable Cause Indicates that the number of simple network management protocol write (WSNMP) violations has
risen above the high boundary. WSNMP violations indicate that an SNMP "get/set" operation
request has been received from an unauthorized IP address.
Recommended Run the errShow command to determine the IP address that sent the request. Responses to
Action security-class messages depend on user policies. Consult your security administrator for response
strategies and policies.
Severity WARNING

FW-1315

Message
<timestamp>, [FW-1315], <sequence-number>,, INFO, <system-name>, <Label>, is
between high and low boundaries(High=<High value>, Low=<Low value>). Current value
is <Value> <Unit>.
Probable Cause Indicates that the number of simple network management protocol write (WSNMP) violations has
changed from a value outside of the acceptable range to a value within the acceptable range.
WSNMP violations indicate that an SNMP "get/set" operation request has been received from an
unauthorized IP address.
Recommended No action is required.
Action
Severity INFO
Fabric OS Message Reference
53-1000437-01
27
FW-1313
201