Sec-1121; Sec-1122; Sec-1123; Sec-1124 - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Reference

SEC-1121

Message
<timestamp>, [SEC-1121], <sequence-number>,, ERROR, <system-name>, Time is out of
range when
Probable Cause Indicates that the time on the switch is not synchronized with the primary fabric configurations
server (FCS), the data packet is corrupted, or a replay attack is launched on the switch.
Recommended Verify that the security event was planned. If the security event was planned, verify that all switches
Action in the fabric are in time synchronization with the primary FCS and that no external entity is trying to
access the fabric. When verification is complete, retry the operation.
Severity ERROR

SEC-1122

Message
<timestamp>, [SEC-1122], <sequence-number>,, INFO, <system-name>, Error code:
<Domain ID>, <Error message>.
Probable Cause Indicates that one of the switches in the fabric could not communicate with the primary fabric
configurations server (FCS).
Recommended Run the secFabricShow command to verify that all switches in fabric are in the ready state. When
Action all switches are in the ready state, retry the operation.
Severity INFO

SEC-1123

Message
<timestamp>, [SEC-1123], <sequence-number>,, INFO, <system-name>, Security
database downloaded by Primary FCS.
Probable Cause Indicates that the security database was successfully downloaded from the primary fabric
configurations server (FCS).
Recommended No action is required.
Action
Severity INFO

SEC-1124

Message
<timestamp>, [SEC-1124], <sequence-number>,, INFO, <system-name>, Secure Mode is
off.
Probable Cause Indicates that a secure mode disable is attempted in a non-secure fabric.
Recommended No action is required.
Action
Fabric OS Message Reference
53-1000437-01
<text>
.
63
SEC-1121
365