Sec-1108; Sec-1110; Sec-1111 - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Reference

63

SEC-1108

SEC-1108
Message
<timestamp>, [SEC-1108], <sequence-number>,, ERROR, <system-name>, Fail to reset
stamp on all switches.
Probable Cause Indicates that a version reset operation failed either because the switch could not get all the
required resources to perform the operation or because it failed to send the message to all
switches in the fabric.
Recommended Verify that the security event was planned. If the security event was planned, run the
Action secFabricShow command to verify that all switches in the fabric are in the ready state. When all
switches are in the ready state, retry the operation.
Severity ERROR

SEC-1110

Message
<timestamp>, [SEC-1110], <sequence-number>,, ERROR, <system-name>, FCS list must
be the first entry in the [Defined Security policies] section. Fail to download
defined database.
Probable Cause Indicates that a security policy download is attempted with a defined policy that does not have the
fabric configurations server (FCS) policy as the first policy. The FCS policy is required to be the first
policy in the defined security database.
Recommended Download a correct configuration with the FCS policy as the first policy in the defined security
Action database.
Severity ERROR

SEC-1111

Message
<timestamp>, [SEC-1111], <sequence-number>,, ERROR, <system-name>, New defined
FCS list must have at least one member in common with current active FCS list.
Fail to download defined database.
Probable Cause Indicates that the defined and active fabric configurations server (FCS) policy list failed to have at
least one member in common.
Recommended A new FCS policy list must have at least one member in common with the previous FCS policy.
Action
Severity ERROR
362 Fabric OS Message Reference
53-1000437-01