Fw-1168; Fw-1169; Fw-1170 - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Reference

FW-1168

Message
<timestamp>, [FW-1168], <sequence-number>,, INFO, <system-name>, <Port Name>,
<Label>, value has changed(High=<High value>, Low=<Low value>). Current value is
<Value> <Unit>.
Probable Cause Indicates that the number of signal losses that the port experiences has changed. Loss of signal
generally indicates a physical problem.
Recommended Check both ends of your cable connection. Verify that the cable and small form-factor pluggables
Action (SFPs) are not faulty.
Severity INFO

FW-1169

Message
<timestamp>, [FW-1169], <sequence-number>,, INFO, <system-name>, <Port Name>,
<Label>, is below low boundary(High=<High value>, Low=<Low value>). Current value
is <Value> <Unit>.
Probable Cause Indicates that the number of signal losses that the port experiences has fallen below the low
boundary. Loss of signal generally indicates a physical problem.
Recommended No action is required. Respond to this message as is appropriate to the particular policy of the
Action end-user installation. A low number of signal loss errors means that the switch is functioning
normally.
Severity INFO

FW-1170

Message
<timestamp>, [FW-1170], <sequence-number>,, WARNING, <system-name>, <Port Name>,
<Label>, is above high boundary(High=<High value>, Low=<Low value>). Current value
is <Value> <Unit>.
Probable Cause Indicates that the number of signal losses that the port experiences has risen above the high
boundary. Loss of signal generally indicates a physical problem.
Recommended Check both ends of your cable connection. Verify that the cable is not faulty.
Action
Severity WARNING
Fabric OS Message Reference
53-1000437-01
27
FW-1168
179