Sec-1136; Sec-1137; Sec-1138 - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Reference

SEC-1136

Message
<timestamp>, [SEC-1136], <sequence-number>,, ERROR, <system-name>, Failed to
verify signature
Probable Cause Indicates that the receiving switch fails to validate the security database sending from the primary
fabric configurations server (FCS) switch. This message usually indicates that the data package is
corrupted, the time stamp on the package is out of range as a result of a replay attack or
out-of-sync time service, or the signature verification failed. Signature verification failure indicates
either an internal error (such as losing the primary public key) or an invalid database.
Recommended Run the secFabricShow command to verify that the fabric is still consistent. All the switches should
Action be in the ready state. If a switch is in the error state, the database might not be correctly updated
for that switch. This message might also be the result of an internal corruption or a hacker attack
to the secure fabric.
Severity ERROR

SEC-1137

Message
<timestamp>, [SEC-1137], <sequence-number>,, ERROR, <system-name>, No signature
<data type, MUA, policy, etc.,>
in
Probable Cause Indicates that the receiving switch fails to validate the security database sending from the primary
fabric configurations server (FCS) switch. This message usually indicates that the data package is
corrupted, the time stamp on the package is out of range as a result of a replay attack or
out-of-sync time service, or the signature verification failed. Signature verification failure indicates
either an internal error (such as losing the primary public key) or an invalid database.
Recommended Run the secFabricShow command to verify that the fabric is still consistent. All the switches should
Action be in the ready state. If a switch is in the error state, the database might not be correctly updated
for that switch. This message might also be the result of an internal corruption or a hacker attack
to the secure fabric.
Severity ERROR

SEC-1138

Message
<timestamp>, [SEC-1138], <sequence-number>,, INFO, <system-name>, Security
database download received from Primary FCS.
Probable Cause Indicates that a non-primary fabric configurations server (FCS) switch received a security database
download.
Recommended Verify that the security event was planned. If the security event was planned, no action is required.
Action If the security event was not planned, take appropriate action as defined by your enterprise
security policy.
Severity INFO
Fabric OS Message Reference
53-1000437-01
<data type, MUA, policy, etc.,>
.
.
63
SEC-1136
367