Sulb-1004; Sulb-1005; Sulb-1006; Sulb-1007 - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Reference Manual

80

SULB-1004

SULB-1004
Message
<timestamp>, [SULB-1004], INFO, FIRMWARE, <event-initiator-details>,
<event-location>, , Firmwarecommit has completed.
Probable Cause Indicates the FirmwareCommit command is executed.
Recommended No action is required. Run the firmwareDownloadStatus command for more information.
Action
Severity INFO

SULB-1005

Message
<timestamp>, [SULB-1005], <sequence-number>,, INFO, <system-name>, Current Active
CP is preparing to failover.
Probable Cause Indicates the active CP is about to reboot. The standby CP is taking over as the active CP.
Recommended No action is required. The firmwareDownload command is progressing as expected.
Action
Run the firmwareDownloadStatus command for more information.
Severity INFO

SULB-1006

Message
<timestamp>, [SULB-1006], <sequence-number>,, INFO, <system-name>, Forced
failover succeeded. New Active CP is running new firmware.
Probable Cause Indicates the previous standby CP has now become the active CP and is running the new firmware
version.
Recommended No action is required. The firmwareDownload command is progressing as expected.
Action
Run the firmwareDownloadStatus command for more information.
Severity INFO

SULB-1007

Message
<timestamp>, [SULB-1007], <sequence-number>,, INFO, <system-name>, Standby CP
reboots.
Probable Cause Indicates the standby CP is rebooting with new firmware.
Recommended No action is required. The firmwareDownload command is progressing as expected.
Action
Run the firmwareDownloadStatus command for more information.
Severity INFO
488 Fabric OS Message Reference
53-1001157-01