Table of Contents
Advertisement
Central management
Digi Remote Manager support
Digi Remote Manager is a hosted remote configuration and management system that allows you to
remotely manage a large number of devices. Remote Manager includes a web-based interface that
you can use to perform device operations, such as viewing and changing device configurations and
performing firmware updates. Remote Manager servers also provide a data storage facility. The Digi
Remote Manager is the default cloud-based management system, and is enabled by default. You can
also select to use Digi aView as the cloud-based management system. See
information about aView.
To use Remote Manager, you must set up a Remote Manager account. To set up a Remote Manager
account and learn more about Digi Remote Manager, go to
remote-manager.
To learn more about Remote Manager features and functions, see the
Guide.
Configure Digi Remote Manager
By default, your IX20 device is configured to use central management using Digi Remote Manager.
Additional configuration options
These additional configuration settings are not typically configured, but you can set them as needed:
Disable the Digi Remote Manager connection if it is not required. You can also configure an
n
alternate cloud-based central management application.
Change the reconnection timer.
n
The non-cellular keepalive timeout.
n
The cellular keepalive timeout.
n
The keepalive count before the Remote Manager connection is dropped.
n
SMS support.
n
HTTP proxy server support.
n
To configure Digi Remote Manager:
WebUI
1. Log into the IX20 WebUI as a user with full Admin access rights.
2. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
IX20 User Guide
Digi Remote Manager support
Digi aView User Guide
www.digi.com/products/cloud/digi-
Digi Remote Manager User
for
737
Advertisement
Table of Contents
