MINOLTA-QMS magicolor 6100 Series Service Manual page 88

Number Component
1 Paper Size Sensor
2 Paper Feed Sensor
3 Paper Exit Sensor
4 Paper Sensor
5 Oil Sensor
6 OHP Sensor
7 Drum Paper Jam Sensor
8 Drum Encoder
9 Photo Belt Sensor
10 Toner Empty Sensor
11 Waste Toner Sensor
12 Home Position Sensor
13 Cleaning Roller Sensor
14 Fuser Unit Temperature
Sensor
15 Exit Paper Full Sensor
16 Toner Key Sensor
Page 1-32
4.6.1.2.4 Sensors
(see Fig. 4-32)
Code
PSU Detects the paper size.
PT1 Detects the paper being fed.
PT2 Detects the paper being ejected.
PEU Detects the paper in the cassette.
OIL Detects if the fuser unit has oil.
OHP Detects if material in the paper cassette is OHP.
DPJ Detects if the paper is wound around the transfer
drum.
EN Detects irregular rotation of the transfer drum.
PBS Detects revolution of the belt.
TPD/TTR Detects the presence of toner for each toner car-
tridge.
WTS Detects if the waste toner bottle is full of waste
(LED/TR) toner.
GHP1/ Detects toner cartridge position.
GHP2
CRS Detects if the cleaning roller is available in the
fuser unit.
TH Detects the fuser temperature.
PFUL Detects tray full condition for exit tray.
TNK Detects the presence of the key on a toner car-
tridge.
Function
16
Fig. 4-32
magicolor 6100 Series Service Manual