MINOLTA-QMS magicolor 6100 Series Service Manual page 274

7.6.6
Page 7-74
Paper Exit Unit/Paper Exit Roller
7.6.6.1 Tools
Phillips Screwdrivers #1 and #2
7.6.6.2 Disassembly Procedures
(see Fig. 7-67)
1. Remove the left and right side covers (see section 7.1.3 and section
7.1.2).
2. Disconnect the harness connector from the paper exit unit.
3. Remove two support pins (left and right sides) of paper exit unit.
4. Remove the paper exit unit.
5. Remove the paper exit cover (see section 7.1.6).
6. Remove the fixing washers at both ends.
7. Remove the bearings from both ends.
8. Remove the paper exit roller from the frame.
Support Pin
(SP4X3, 2 pcs.)
Fig. 7-67
magicolor 6100 Series Service Manual