MINOLTA-QMS magicolor 6100 Series Service Manual page 142

5.2.2.7 Cleaning of the Printer Interior
The Printer Interior (bottom) should be cleaned according to the periodic
maintenance cleaning schedule presented in Table 5-3.
CAUTION
Before cleaning the inside of printer, protect the transfer
drum with paper so that the nozzle of the vacuum will not
touch the transfer drum.
Tools and Supplies:
1. Toner Vacuum
2. Lint-free cotton cloth (2 ~ 3)
Cleaning Procedures (see Fig. 5-10):
1. Open the top door.
2. Open the front door.
3. Remove the toner cartridges.
4. Remove the OPC belt cartridge.
5. Vacuum the toner from the printer base with a toner vacuum.
6. Clean the printer interior with a lint-free cloth.
7. Reinstall the consumables.
Printer Interior
Toner Vacuum
Fig. 5-10
Page 5-12 magicolor 6100 Series Service Manual