MINOLTA-QMS magicolor 6100 Series Service Manual page 250

7.4.3
Page 7-50
Developer Clutch (DVCL)
7.4.3.1 Tools
Phillips Screwdrivers #1 and #2
Slotted Screwdriver #1
7.4.3.2 Disassembly Procedures
(see Fig. 7-44)
1. Remove the right side cover.
2. Disconnect the harness connector of the appropriate clutch from
IOD2.
3. Remove the washer from the shaft of the appropriate clutch.
4. Pull out the clutch from the shaft.
7.4.3.3 Assembly Procedures
1. Prepare a new clutch. This clutch is common for all four colors.
2. Install the new clutch to the appropriate location.
3. Install the washer onto the shaft.
4. Reassemble in reverse order of disassembly.
Washer
Developer Clutch
Fig. 7-44
magicolor 6100 Series Service Manual