MINOLTA-QMS magicolor 6100 Series Service Manual page 194

Page 6-38
6.5.1.3 Adjustment of Left Margin if Duplexer is Installed
When installing a duplexer, it may be required to adjust the left margin.
Confirm and adjust the left margin according to the following procedure:
6.5.1.3.1
6.5.1.3.2
6.5.1.3.3
6.5.1.3.4
1.
2.
3.
C
Left margin
D
Purpose
To print within the guaranteed print area of paper.
Timing
At addition of the option, At the replacement of MCTL PWB.
Specification value of the adjustment
l=3.0+1.5mm.
Procedure
Measure the left margin position C and D of paper.
Confirm if measurements meet the specification value.
(C+D)/2 < Default Value ð3.0 ±1.5mm.
If measurements do not meet the specification value, imple-
ment the Adjustment Method described in section 6.5.1.4.
Guaranteed
Print
Area
Fig. 6-5
magicolor 6100 Series Service Manual