MINOLTA-QMS magicolor 6100 Series Service Manual page 47

3.3.5
magicolor 6100 Series Service Manual
LFU Installation
1. Lay the Lower Feeder Unit
(LFU) on a flat and stable sur-
face. Adjust the anchor feet all
the way up.
2. Pull out the LFU connector cable
from the rear left of LFU.
3. Orient the LFU and the posi-
tion of the adjuster pins. Ver-
ify the position of the claw of
the tray latch (see Fig. 3-25).
The printer weighs approximately 143.2 lbs. (65kg) which is too
heavy for one person to carry. At least two adults are needed to
move the printer. Because this printer is a precision machine, carry
it carefully, making sure not to bump or jar it excessively.
CAUTION
Anchor Feet
Fig. 3-23
LFU Cable
Fig. 3-24
Adjuster pins
Tray Latch
Fig. 3-25
Page 3-15