MINOLTA-QMS magicolor 6100 Series Service Manual page 263

7.5.12 Waste Toner Sensor (WTS)
magicolor 6100 Series Service Manual
7.5.12.1 Tools
Phillips Screwdrivers #1 and #2
7.5.12.2 Disassembly Procedures
(see Fig. 7-57)
1. Remove the right side cover (see section 7.1.2).
2. Remove the right base cover (see section 7.1.10).
3. Remove the front stay (R) (see section 7.3.4.2[5]).
4. Remove the set screw of the bottle holder.
5. Remove the bottle holder (see section 7.3.4.2[6])
Waste Toner Bottle
7.5.12.3 Assembly Procedures
1. Prepare a new bottle holder.
2. Reassemble in reverse order of disassembly.
Bottle Holder
Fig. 7-57
(LED)
(TR)
Waste Toner Sensor
Page 7-63