MINOLTA-QMS magicolor 6100 Series Service Manual page 44

3.3.4
Page 3-12
Procedures for installation of paper cassette and adapter
(see Fig. 3-16 to Fig. 3-19).
3.3.4.1 Paper Cassette
1. Remove the cassette cover.
2. Set the side plate according to the
paper size. For the horizontal direc-
tion, move the green side plate to
meet the paper size position (see
Fig. 3-17). For the vertical direc-
tion, move the green lever to adjust
the end plate to meet the appropri-
ate paper-size position (see Fig. 3-
18).
3. Load paper into the cassette.
The capacity of the cassette is dependent upon the type of media
used. Keep the volume below the upper limit marked on the label.
Overloading media will result in paper feed jams or print quality
failure.
4. Install the cassette cover and slide the cassette into the printer.
Cassette Cover
CAUTION
magicolor 6100 Series Service Manual
Paper Cassette
Fig. 3-16
Fig. 3-17
Fig. 3-18
PAPER
LABEL
OHP FILM
Fig. 3-19