MINOLTA-QMS magicolor 6100 Series Service Manual page 151

5.3.5
magicolor 6100 Series Service Manual
Replacement of the Paper Discharger
(see Fig. 5-23)
5.3.5.1 Criterion of Replacement
The paper discharger should be replaced with a new paper discharger
according to the periodic maintenance cycle set out in the Table 5-4.
When it is time to replace the paper discharger, a warning code "120K
CHECKUP" will appear in the operator panel.
5.3.5.2 Purpose of Replacement
To prevent jamming due to deterioration of the paper discharger unit.
Do not touch the corona of the paper discharger unit.
5.3.5.3 Tools and Supplies:
1. Clean lint-free cloth (2 ~ 3)
2. Paper discharger (1)
5.3.5.4 Procedures
5.3.5.4.1
1.
2.
5.3.5.4.2
1.
2.
3.
5.3.5.4.3
1.
2.
CAUTION
Disassembly Sequence
After turning the power off, disconnect the power cord from
the outlet.
Open the transfer unit door.
Sequence of Replacement
Remove the paper dis-
charger from the transfer
unit.
Clean the area where the
paper discharging unit
will be mounted.
Install new paper dis-
charger in the transfer unit
(see Fig. 5-23).
Sequence of Assembly
Close the transfer unit door.
Upon completion of warming-up, clear the code "120K
CHECKUP" with the Service Mode CLEAR CARE Mode or
via "ADMINISTRATION/CONSUMABLES/PM SERVICE/
120K PM SERVICE."
Paper Discharger
Fig. 5-23
Page 5-21