Table of Contents
Advertisement
4.6
Structure of the Control System
4.6.1
Number
Control Component
1
Print Process Control
2
Laser Output Control
3
Fuser Temperature Control
4
Toner Sensing Control
5
Interface Control
6
Operator/Control Panel
7
Error Control
magicolor 6100 Series Service Manual
Electrical System and Function
Most of the main electrical components of this printer are controlled by the MCTL
P.W.B.
4.6.1.1
Overview of the Structure of the Sequence Control
The basic structure of the sequence control is shown in Fig. 4-28.
Controls the print process through the paper feeding, print-
ing, and transport.
Automatically controls the laser output.
Controls the fusing heater so that the fuser roller and back-
up roller maintain the set temperature.
Senses the absence or presence of toner.
Processes I/O signals to and from the external controller
(host).
Displays the printer operation status on the panel.
Stops the printer safely, and displays the status of the
defects if any error occurs with the printer.
Function
Page 1-27
Advertisement
Table of Contents
Troubleshooting
