MINOLTA-QMS magicolor 6100 Series Service Manual page 49

Left Side Cover
magicolor 6100 Series Service Manual
6. Connect the LFU interface
cable to the printer connec-
tion.
7. Install the right side cover. Pop in
the right side cover (back to front);
no mounting hardware is neces-
sary.
8. Install the left side cover. Pop in the left side cover; no mounting hardware is
necessary.
Fig. 3-32
9. Adjust the anchor feet for stability.
Rotate each anchor foot to move it
down, and stop the adjustment
when the anchor foot reaches the
level surface.
10. Turn the locking nut upward and
fix the anchor bolt.
When lifting the printer, make sure that the connector of the LFU
connector cable and tray latch are disconnected before lifting.
Duplexer Connector
(Upper, Black)
LFU Connector
(Lower, White)
Fig. 3-30
Fig. 3-31
Left Side Cover
CAUTION
Printer Side
LFU Cable
Right Side Cover
Fig. 3-33
Stopper
Anchor Foot
Fig. 3-34
Page 3-17