MINOLTA-QMS magicolor 6100 Series Service Manual page 260

7.5.9
Page 7-60
Oil Sensor (OIL)
7.5.9.1 Tools
Phillips Screwdrivers #1 and #2
7.5.9.2 Disassembly Procedures
(see Fig. 7-54)
1. Remove the fuser (see section 7.7).
2. Remove the fusing cover (located under fuser).
3. Disconnect the oil sensor connector.
4. Remove two set screws (ST3x6) from the oil sensor.
5. Remove the oil sensor.
7.5.9.3 Assembly Procedures
1. Install a new oil sensor.
2. Reassemble in reverse order of disassembly.
Fig. 7-54
Oil Sensor
magicolor 6100 Series Service Manual