MINOLTA-QMS magicolor 6100 Series Service Manual page 5

No. Date of Revision
1 July, 1999
2 August, 1999
3 October, 1999
4 October, 1999
5 March 2000
6 July 2000
7 June 2001
Note:Some pages found within this manual are 11" x 17". If you print out the Acrobat files, please note
these pages should be printed seperately.
FCC NOTICE
WARNING
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a commercial environment. This equipment generates, uses, and can radiate radio frequency
energy, and if not installed and used in accordance with the instruction manual, may cause harmful inter-
ference to radio communications. Operation of this equipment in a residential area is likely to cause harm-
ful interference in which case the user will be required to correct the interference at his/her own expense.
A shielded cable is required to comply with the limits for a Class A digital device, pursuant to Part 15 of
the FCC rules.
Caution: Any modifications or changes to this product not expressly approved in writing by the manufac-
turer responsible for compliance to Federal Regulations could void the user's authority to operate this prod-
uct within the Laws and Regulations of the Federal Communications Commission.
Canadian Compliance
magicolor 6100 Series Service Manual
Revision Control Table
Revision Code
First Edition First edition.
"A" Edition Reviewed to cover the mass-production
unit.
"A" Edition Reviewed following pages:
3-3, 7-34, 7-42, 7-60, 9-1 and 9-5
QMS REV. 001 Internal manual revision. Duplexer and
LFU information added.
QMS REV. 001A Final OEM information included. Format
revision.
Minolta-QMS Added LFU wiring diagram. Error mes-
Rev. 001B sage corrections included
Minolta-QMS New OEM information included.
Rev. 001C
Description of Revision
Page iii