MINOLTA-QMS magicolor 6100 Series Service Manual page 234

7.3.1
Page 7-34
Main Motor / Main Motor Assembly
7.3.1.1 Tools
#1 Phillips Screwdriver
7.3.1.2 Disassembly Procedures
(see Fig. 7-31)
1. Remove the right side cover (see section 7.1.2).
2. Remove the top cover (see section 7.1.5).
3. Remove the connector connected with the main motor.
4. Remove three fixing screws (ST3x6) from the main motor assembly.
5. Remove the main motor assembly from the frame.
6. Remove four fixing screws (ST3x6) from the main motor.
7. Remove the main motor from the main motor assembly. Separate the
motor and BD Gear Unit.
7.3.1.3 Assembly Procedures
1. Install the main motor assembly to the engine frame.
2. Reassemble in reverse order of disassembly.
magicolor 6100 Series Service Manual