MINOLTA-QMS magicolor 6100 Series Service Manual page 55

Procedure
1. Turn off the printer. Holding down both scroll
keys (Left and Right) and the MENU Key, turn
on the printer.
2. Press the SELECT key so that the display
changes from screen A) to B).
3. Select "GRID" with the SCROLL keys. Note
that you could select the option of printing a
"STRIPE" here.
4. Press the SELECT key so that the display
changes from screen B) to screen C).
5. Select the color "R" (red) with the SCROLL
keys. Note that you could select the option of
printing yellow, magenta, cyan, black, red,
green, or blue here.
6. Press the SELECT key so that the display
changes from screen C) to screen D). This
screen will only appear when the optional
duplexer is attached.
7. Press the SELECT key so that the display
changes from screen D) to screen E).
8. Press the MEDIA key to stop the test print.
9. Repower the printer to bring it back to normal
printing mode.
magicolor 6100 Series Service Manual
3.3.7.1.2 Test Print Procedures
Perform the test print according to the following procedures.
3.3.7.1.3 Selection of Media
Press the MEDIA key on the operator panel, which selects
the media to be used. Select the tray which will hold the
media.
3.3.7.1.4 Operator Call
When "Operator Call" is displayed on the operator panel, see
the "Operator Call" information in section 8.2.1, and take the
necessary actions.
Operator Panel
SERVICE MODE
A)
TEST PRINT / NEXT
31 GRID PRT
B)
GRID / STRIPE
31 GRID PRT
C)
Y / M / C / K / R / G / B
31 GRID PRT
D)
DUP 1 / 2 / 3 / SIMP
31 GRID PRT YM
E)
F) MEDIA KEY
Page 3-23