16
Confirm the connection between the printer and LFU.
Is the harness connector from LFU securely
connected with the printer ?
Is "16 ALIGN LFU" cleared ?
Confirm the internal harness of printer.
Is the harness securely connected between
LFU and IOD3 ?
Is the harness securely connected between
LFU and IOD1 P.W.B. ?
Reset the power supply.
Is "16 ALIGN LFU" cleared ?
Replace the IOD1 P.W.B.
No
Is "16 ALIGN LFU" cleared ?
magicolor 6100 Series Service Manual
ALIGN LFU
Yes
Reset the power supply.
No
Yes
Yes
No
Yes
Complete
No
Yes
No
No
Yes
Fig. 8-18
Connect the connector.
Connect the connector.
Connect the connector.
Page 8-25