7.1.7
Page 7-12
Transfer Unit Door Cover
7.1.7.1
Tools
#1 and #2 Phillips Screwdrivers
7.1.7.2
Disassembly Procedures
(see Fig. 7-11)
1. Open the transfer unit.
2. Remove one fixing screw (BT4x10) from the band securing the trans-
fer unit.
3. Holding the transfer unit horizontally, slide it out from the left edge
of the TR support.
4. Remove the transfer unit.
5. Remove four fixing screws (BT3x8) from the back cover.
6. Remove the back cover from the transfer unit.
7.1.7.3
Assembly Procedures
1. Reassemble in reverse order of disassembly.
Transfer Unit
Fig. 7-11
Transfer Door
Cover
Fixing Screw
magicolor 6100 Series Service Manual