MINOLTA-QMS magicolor 6100 Series Service Manual page 312

7.9.5
Page 7-112
Interlock Switches
7.9.5.1 Tool
#1 Phillips Screwdriver
7.9.5.2 Disassembly Procedures
(see Fig. 7-113)
1. Remove the LFU back door.
2. Remove the LFU paper guide by removing four set screws (ST3x6).
3. Disconnect the switch connector.
4. Remove the switch by removing one set screw (ST3x16).
Interlock Switch
7.9.5.3 Assembly Procedures
1. Reassemble in reverse order of disassembly.
Fig. 7-113
Interlock Switch
magicolor 6100 Series Service Manual