MINOLTA-QMS magicolor 6100 Series Service Manual page 248

7.4.1
Page 7-48
Clutches (FUCL, FBCL, RECL, FBCM, TRCM)
7.4.1.1 Tools
Phillips Screwdrivers #1 and #2
Small Slotted Screwdriver #1
7.4.1.2 Disassembly Procedures
(see Fig. 7-42)
1. Remove the right side cover.
2. Remove the harness connector of the appropriate clutch from the
IOD2.
3. Remove the washer of the appropriate clutch from the shaft.
4. Pull out the clutch from the shaft.
7.4.1.3 Assembly Procedures
1. Install new clutches at the appropriate locations.
2. Reassemble in reverse order of disassembly.
Cleaning Cam
Clutch (FBCM)
Registration Clutch
(RECL)
Fig. 7-42
magicolor 6100 Series Service Manual
Fuser Clutch (FUCL)
Cleaner Clutch (FBCL)
TR Cam Clutch (TRCM)
Clutch
Washer