MINOLTA-QMS magicolor 6100 Series Service Manual page 42

3.3.2
Page 3-10
Procedures for Installation of the OPC Belt Cartridge
(see Fig. 3-9 to Fig. 3-12)
Do not touch the OPC belt. Do not expose the OPC belt to direct
light because the belt may be ruined.
1. Open the front cover.
2. Open the paper exit unit.
3. Open the belt cartridge lock levers.
4. Pull and remove the tension release
pins from both sides (left and right)
from the belt cartridge.
5. Remove the protective sheet from
the belt cartridge.
CAUTION
Front Cover
Belt Cartridge
Lock Lever
(Left)
Protective Sheet
magicolor 6100 Series Service Manual
Paper Exit Unit
Fig. 3-9
Belt Cartridge
Lock Lever
(Right)
Guide
Belt Cartridge
Fig. 3-10
Lock Lever
Tension
Release Pins
Fig. 3-11