MINOLTA-QMS magicolor 6100 Series Service Manual page 299

magicolor 6100 Series Service Manual
7.8.4.2 Motor (2)
7.8.4.2.1
7.8.4.2.2
7.8.4.2.3
Tool
#1 Phillips Screwdriver
Disassembly Procedures
(see Fig. 7-99)
1. Remove the bottom paper guide (see section 7.8.1.11)
and the reverse paper guide unit (see section 7.8.1.9).
2. Remove the motor harness connector CN7 from the
Relay P.W.B.
3. Remove the harness from the clamp.
4. Remove the protective cover.
5. Remove two set screws (ST3x6) from the motor (2).
6. Remove the motor (2) from the frame.
Motor (2)
Fig. 7-99
Assembly Procedures
1. Reassemble in reverse order of disassembly.
Page 7-99