MINOLTA-QMS magicolor 6100 Series Service Manual page 216

7.1.11 Left Base Cover
When assembling the base cover, insert the lead-
ing edge of left base cover into the two hooks at
the bottom (left and right) of the base plate (see
Fig. 7-17). Join the projecting part of left base
cover to the 3 hole locations in the base plate bot-
tom (see Fig. 7-17).
Page 7-16
7.1.11.1 Tools
#2 Phillips Screwdriver
7.1.11.2 Disassembly Procedures
(see Fig. 7-16)
1. Remove the left side cover (see section 7.1.3)
2. Remove two set screws (BT4x10) from the left base cover.
3. Remove the left base cover from front to back.
7.1.11.3 Assembly Procedures
1. Assemble the new left base cover in reverse order of disassembly.
Left Base Cover
Fig. 7-16
CAUTION:
Hole
Projecting Part
Hook
Fig. 7-17
magicolor 6100 Series Service Manual
Base Plate
Left Base
Cover