MINOLTA-QMS magicolor 6100 Series Service Manual page 167

Message in LCD
ENERGY SAVER
CALL FOR SERVICE "ERROR"
magicolor 6100 Series Service Manual
Table 6-3: Normal Mode Operations
• The printer is in Energy Saver mode to reduce
power consumption during periods of inactivity.
• Message LED is on and Ready LED blinks.
• This mode is cleared by sending WAKE-UP
command from controller.
• Printer is ready to print after the warming-up
process.
• An error has been detected with the item indicated
in the service message. See section 8,
"Troubleshooting," for full details of errors.
• Engine is at standstill.
• Message LED is on.
Description of Message
Page 6-11