Fig. 7-84
magicolor 6100 Series Service Manual
7.8.1.8
Bottom Cover
7.8.1.8.1
7.8.1.8.2
Lower-rear
Cover
Bottom Cover
7.8.1.8.3
Tool
Phillips Screwdriver
Disassembly Procedures
(see Fig. 7-84 and Fig. 7-85)
1. Remove the lower-rear cover (see section 7.8.1.7).
2. Remove the harness cover.
3. Remove two set screws (M4x6) from the bottom cover.
4. Remove the harness inside the bottom cover.
5. Remove the bottom cover from the base.
Harness
Cover
Assembly Procedures
1. Reassemble in reverse order of disassembly.
Bottom
Cover
Fig. 7-85
Page 7-91