MINOLTA-QMS magicolor 6100 Series Service Manual page 276

7.6.7
Discharger brush
Page 7-76
Discharger Brush
7.6.7.1 Tools
Phillips Screwdrivers #1 and #2
7.6.7.2 Disassembly Procedures
(see Fig. 7-68)
1. Open the paper exit unit.
2. Remove the paper exit front cover (see section 7.1.6).
3. Remove the paper exit cover (see section 7.6.6).
4. Remove two fixing screws (BT4x8) from the discharger brush.
5. Remove the discharger brush.
7.6.7.3 Assembly Procedures
1. Install the new discharger brush into the paper exit unit.
2. Reassemble in reverse order of disassembly.
Do not damage the bristles of the discharger brush.
Fig. 7-68
CAUTION:
Paper Exit Cover
Assembly
magicolor 6100 Series Service Manual