MINOLTA-QMS magicolor 6100 Series Service Manual page 258

7.5.7
Paper Size
Sensor
Paper Guide
Page 7-58
Paper Size Sensor PSU
7.5.7.1 Tool
#1 Phillips Screwdriver
7.5.7.2 Disassembly Procedures
(see Fig. 7-52)
1. Remove the transfer unit (see section 7.6.1).
2. Remove the left paper guide by removing two set screws (ST3X6)
(see section 7.6.1).
3. Remove two set screws (ST3x6) from the paper size sensor.
4. Disconnect all the connectors from the paper size sensor.
5. Remove the paper size sensor.
7.5.7.3 Assembly Procedures
1. Reassemble in reverse order of disassembly.
Transfer Unit
Fig. 7-52
magicolor 6100 Series Service Manual