MINOLTA-QMS magicolor 6100 Series Service Manual page 349

8.3.2
Problem
Is recommended paper being used?
Paper
Is the paper damp, or has the paper
been opened?
Is the paper loaded correctly?
Paper
Cassette
Is the end plate properly set?
Is the paper jammed in the paper feed
section?
Pick-Up
Roller
Is the pick-up roller damaged?
Problem
Open the transfer unit and check the following:
Is there any paper inside the unit?
Is the transfer roller firmly locked by
Transfer the lock lever?
Unit
Is the paper discharger unit installed in
place?
Is the corona of the paper discharger
unit damaged?
Is the fusing unit installed in place?
Fusing Unit Is there any paper between the rollers?
Is fusing oil still in the oil bottle?
magicolor 6100 Series Service Manual
Paper Jam Troubleshooting
8.3.2.1 Misfeed Jams
See Table 8-2 for information on troubleshooting misfeed jams.
Table 8-2: Misfeed Jam Troubleshooting
Check Item
8.3.2.2 Inner Jams
See Table 8-3 for information on troubleshooting misfeed jams.
Table 8-3: Inner Jam Troubleshooting
Check Item
Result? Corrective Action
No Use recommended paper.
Yes Replace with new paper.
No Load the paper correctly.
Set the end plate to meet the
No
paper size.
Yes Remove the jammed paper.
Replace the damaged pick-up
Yes
roller.
Result? Corrective Action
Yes Remove the paper.
Secure the transfer roller with the
No
lock lever.
Install the paper discharger unit
No
firmly into place.
Replace the existing paper
Yes
discharger unit with new unit.
Install the fusing unit firmly in
No
place.
Yes Remove the paper.
Replace the existing oil bottle
No
with a new bottle.
Page 8-35