MINOLTA-QMS magicolor 6100 Series Service Manual page 50

3.3.6
Paper Exit Upper Cover
Fig. 3-35
LFU Side Cover
Fig. 3-38
Page 3-18
Installation of the Duplex Unit
3.3.6.1 Preparation of the Printer and Lower Feed Unit
1. Assemble the lower feeder unit on the printer. See the installation instructions
for the lower feeder unit
(see section 3.3.5).
3.3.6.2 Preparation of the Printer
1. Remove the paper exit upper cover (see Fig. 3-35).
2. Remove the two caps from the upper rear cover (see Fig. 3-36).
3. Remove left and right LFU side covers (see Fig. 3-37 and Fig. 3-38).
4. Remove the LFU left and right access plates (Fig. 3-39 and Fig. 3-40).
Caps
Left Access Plate
Left Side Cover
Fig. 3-36
Fig. 3-39
magicolor 6100 Series Service Manual
Fig. 3-37
Right Access Plate
Fig. 3-40