MINOLTA-QMS magicolor 6100 Series Service Manual page 257

7.5.6
Transfer Unit
Paper Sensor
PE
magicolor 6100 Series Service Manual
Paper Empty Sensor (PE) / OHP Sensor (OHP)
7.5.6.1 Tool
#1 Phillips Screwdriver
7.5.6.2 Disassembly Procedures
(Fig. 7-51)
1. Remove the transfer unit (see section 7.6.1).
2. Remove two set screws (ST3x6) from the left paper guide.
3. Remove the left paper guide.
4. Remove two set screws (ST3x6) from the upper-left paper guide.
5. Remove the connector from the sensor.
6. Remove the upper-left paper guide.
7. Remove the paper empty sensor (PE) from the upper-left paper guide,
or remove two set screws (BT3x8) from the OHP sensor (OHP) to
remove it from the upper-left paper guide.
8. Remove the OHP sensor (OHP).
OHP Sensor
Upper-left
Paper Guide
7.5.6.3 Assembly Procedures
1. Install a new paper empty sensor (PE) or a new OHP sensor (OHP)
onto the upper-left paper guide.
2. Reassemble in reverse order of disassembly.
View From Rear
OHP Sensor
Paper Sensor PE
Fig. 7-51
Uppper-left
Paper Guide
Page 7-57