MINOLTA-QMS magicolor 6100 Series Service Manual page 311

7.9.4
magicolor 6100 Series Service Manual
Paper Feeder Roller / Separator Pad
7.9.4.1 Tool
#1 Phillips Screwdriver
7.9.4.2 Disassembly Procedures
(see Fig. 7-112)
1. Remove the left and right side covers (see section 7.9.3[1] and see
section 7.9.3[2]).
2. Remove the LFU back door.
3. Remove the LFU paper guide by removing four set screws (ST3x6).
4. Remove the paper guide assembly by removing one set screw
(ST3x6).
5. Sliding the Paper Feeder Roller along the shaft, remove the Paper
Feeder Roller.
6. Remove the Separator Pad.
7.9.4.3 Assembly Procedures
1. Install the new Separator Pad.
2. Install the new Paper Feeder Roller.
3. Reassemble in reverse order of disassembly.
Separator Pad
Fig. 7-112
Paper Feeder Roller
Page 7-111